Specification	AP10/DP10	DP15	DP15TL	DP45	DP103	DP215	DP303	DP360
TYPE	Differential, Gage, or Absolute All Welded Construction	Differential or Gage	Differential or Gage	Differential or Gage                           Very Low Range	Differential or Gage                           Ultra-Low Range	Differential or Gage               17-7 PH SS	Differential or Gage               High Line, LowΔP	Differential or Gage               High Line Pressure
FULL SCALE RANGES	±0.08 to 3200 psid                0.08 to 3200 psia	±0.08 to 3200 psid	±0.08 to 3200 psid	±0.6"H20 to 12.5psid	±0.1"H20 to 12.5psid	±0.08 to 3200 psid	±0.08 to 5000 psid	±50 to 10,000 psid
AVAILABLE RANGES       (See Pressure Range Chart)	-20 THRU -64	-20 THRU -64	-20 THRU -64	-14 THRU -34	-06 THRU -40	-40 THRU -64	-20 THRU -66	-38 THRU -70
ACCURACY(1)	±0.50% FS	±0.25% FS	±0.50% FS	±0.25% FS	±0.25% FS	±0.25% FS	±0.50% FS	±0.50% FS(2)
MATERIAL(3)	410SST/17-7PHSST	410SST	410SST	410SST	410SST	17-7PHSST	410SST	410SST
OVER PRESSURE MAXIMUM 0.5% OUTPUT SHIFT	AP10: 20 psia or 200% FS (4000 psia, maximum) DP10: 200%FS	200% FS                            (4000 psid, maximum)                                     (4000 psid, maximum)	200% FS (4000 psid, maximum)	200%FS or                         3psid whichever is greater	200%FS or                         3psid whichever is greater	200% FS                            (4000 psid, maximum)	200% FS (7500 psid, maximum)	200% FS (12500 psid, maximum)
MAXIMUM LINE PRESSURE & ERROR	3200 psig (6)                        <1% FS/1000 psi	3200 psig                         <1% FS/1000 psi	3200 psig                        <1% FS/1000 psi	15 psig                                <1% FS	100 psig                                <1% FS	3200 psig                         <1% FS/1000 psi	5000 psig                            <1% FS/1000 psi                 3% Maximum	12,500 psig                        <1% FS/1000 psi              3% Maximum
THERMAL ZERO SHIFT	2%FS/ 100ºF (5)	1%FS/ 100ºF (4)	1%FS/ 100ºF	1%FS/ 100ºF	1%FS/ 100ºF	1%FS/ 100ºF	1%FS/ 100ºF	1%FS/ 100ºF (5)
THERMAL SENSITIVITY SHIFT	4% Reading/ 100ºF	2% Reading/ 100ºF (4)	2% Reading/ 100ºF(4)	2% Reading/ 100ºF	5% Reading/ 100ºF	2% Reading/ 100ºF	2% Reading/ 100ºF(4)	4% Reading/ 100ºF
PRESSURE PORTS	5/16-24 UNF-2B                   w/ 1/8" Male Pipe                     Thread Adapter	1/8-27 NPTF                        8-32 Bleed Screw	1/8-27 NPTF                        8-32 Bleed Screw	1/8-27 NPTF                                    8-32 Bleed Screw	1/8-27 NPTF                                    8-32 Bleed Screw	1/8-27 NPTF                                    8-32 Bleed Screw	1/8-27 NPTF                                    8-32 Bleed Screw	5/16-24 UNF-3B                   8-32 Bleed Screw
APPROXIMATE WEIGHT APPROXIMATE SIZE	11 ounces                           11/2"  X  11/2"  X  1 1/4"	12 ounces                           11/2"  X  11/2"  X  1 1/4"	1.5 lb                                   11/2"  X  11/2"  X  1 1/4"	12 ounces                           21/4" dia. X 3/4"	39 ounces                           4" dia. X 3/4"	12 ounces                           11/2"  X  11/2"  X  1 1/4"	2 lb                                     13/4"  X  13/4"  X  2 1/2"	12 ounces                           13/4"  X  13/4"  X  1 1/4"
LIT BY FAX CODE#	2560	2561	2562	2563	2564	2565	2566	2567
General Electrical Specification, All Models:						Notes:
Excitation:	Rated: 5Vrms @ 3kHz to 5kHz		Inductance:	20mH, Nominal, each coil		(1) Accuracy includes non-linearity, hysteresis, and non-repeatability (RSS).
	Limits: 30Vrms @ 3kHz					(2) ±1% FS above 5,000 psi.
	Frequency Range: 1 kHz to 20 kHz		Isolation:	20 Mohms, Case to Electrical Terminal		(3) See also, ORDERING INFORMATION for additional options.
						(4) 4% Reading/100ºF for ranges above 20 psi.
Output Signal:	35mV/V Typical, 20mV/v		Operating Temperature:	0 to 160ºF (STD)		(5) 4% FS/100ºF for ranges below 2 psi.
	Minimum at Full Scale Pressure			-65 to +250ºF (Optional)		(6) Applies to DP10 only.
				(See Ordering Information)
Balance:	±5mV/V, Maximum